제품 상세정보
원래 장소: 중국
브랜드 이름: zheheng steel
인증: iso9001
모델 번호: 88.9 밀리미터
지불과 운송 용어
최소 주문 수량: 협상 가능
가격: Negotiable
포장 세부 사항: 내수성 재료 또는 나무 상자 포장과 번들에서
배달 시간: 30 일
지불 조건: L/C (신용장), 전신환, 인수 인도, D/P (지급도 조건)
공급 능력: 50TONS/30DAYS
소재: |
TP317 |
표준: |
ASTM, GB, JIS, DIN, 엔, AISI |
소재 유형: |
S31700 |
기술: |
콜드드론 |
적용: |
파이로케미칼 공정 |
패키지: |
우븐 포장 |
OD: |
6-830mm |
소재: |
TP317 |
표준: |
ASTM, GB, JIS, DIN, 엔, AISI |
소재 유형: |
S31700 |
기술: |
콜드드론 |
적용: |
파이로케미칼 공정 |
패키지: |
우븐 포장 |
OD: |
6-830mm |
Stainless Steel Pipe Tube A312/ A312M TP317 S31700 Used in furnace material
Introduction to products:
Stainless steel is called high alloy steel. They contain about 4-30% chromium. According to their crystal structure, they are classified into martensitic, austenitic and ferritic steels. Grade 317 stainless steel is an improved version of 316 stainless steel. It has high strength and corrosion resistance.
316 stainless steel plate and 317 stainless steel plate are molybdenum containing stainless steel, of which 317 stainless steel molybdenum content is slightly better than 316 stainless steel. Due to the molybdenum in the steel, the overall performance of the steel is better than 310 and 304 stainless steel, under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 316 stainless steel has a wide range of uses.
APPLICATIONS :
Grade 317 stainless steel is used in the following applications:
Chemical Composition of 317(S31700)
C | Si | Mn | Ni | P | S | Cr | Ni | Mo | |
Min | 9 | 18 | 11 | 3 | |||||
Max | 0.08 | 1 | 2 | 12 | 0.045 | 0.030 | 20 | 15 | 4 |
Description for our production range:
Name :Stainless Steel seamless Pipe
Standard :
A213
Material Grade :
S31700
Diameter :OD: 6-830mm
W.T: 0.6mm - 60mm
Length :Up to 13 meter or as customers' request
Tolerance :According to the Standard.
Surface :
Natural Color of annealing & pickling, 180G, 320G, 400G Satin / Hairline
400G, 500G, 600G or 800G Mirror finish
Test :
UT, ET, HT, RT,ect, and others according to the standard,
or as the requests of the customer
our products packing:
Tensile Requirements – Stainless Steel 310S/310H:
Tensile Strength (KSI): 75
Yield Strength (KSI): 30
Notes:
10-6·K-1 = 10-6/K
1 Ω·mm²/m = 1 μΩ·m
1 g/cm3 = 1 kg/dm3 = 1000 kg/m3
1 GPa = 1 kN/mm2
1 MPa = 1 N/mm2
other supplement:
1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8" TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include "Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T"
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.