A312/ A312M TP317L S31703 Stainless Steel Pipe Tube Used In Chemical Ships

Stainless Steel Pipe Tube A312/ A312M TP317 S31700 Used in furnace material

Introduction to products:

Alloy 317L (UNS S31703) is a low carbon corrosion resistant austenitic chromium-nickel-molybdenum stainless steel. The high levels of these elements ensure that the alloy has superior chloride pitting and general corrosion resistance to traditional grades 304/304L and 316/316l. In strong corrosive environments with sulfur-containing media, chlorides and other halides, the alloy offers corrosion resistance relative to 316L.

The low carbon content of 317l alloy makes it free of intergranular corrosion caused by chromium carbide precipitation during welding, making it able to be used in the welded state. With the addition of nitrogen as a fortifying agent, the alloy can obtain dual certification for Alloy 317 (UNSS31700).

APPLICATIONS :

Compared with 316L, 317L steel has good seawater resistance and SCC resistance, which is used in Chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

Chemical Composition of 317L(S31703)

Description for our production range:

our products packing:

Tensile Requirements – Stainless Steel 310S/310H:

Tensile Strength (KSI): 75

Yield Strength (KSI): 30

Notes:

10-6·K-1 = 10-6/K

1 Ω·mm²/m = 1 μΩ·m

1 g/cm3 = 1 kg/dm3 = 1000 kg/m3

1 GPa = 1 kN/mm2

1 MPa = 1 N/mm2

other supplement:

1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8" TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include "Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T"
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.